# Mounting Kit The mounting kit is designed to install the 4G router on a pole with a diameter of Φ35\~50mm. Check the video tutorial on Youtube **Install Outdoor Router on A Pole ▶️**\ More examples are available in the case studies :link: \ ## L-Shape Bracket 1. Use the hex wrench to take down the Hex bolts, then remove the clamps from the router. 2. Install the L-shape brackets between the router and clamps. 3. Use the hex wrench to tighten the hex bolts.

Install L Bracket and Clamp on the EZR33 Router

## ## Install on A Pole 1. Clasp a pole with the U-bolts and holders. 2. Attach the L-shape brackets to the holders already installed on the router. 3. Put spring washers, washers, and bolts on U-bolts, then tighten the bolts with a spanner.

### Wall Bracket :link: If you do not have a pole to install the 4G router, you can buy the Φ40mm wall bracket in our shop.\ --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://outdoor.router.works/ezr33/installation/mounting-kit.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.