# Mount On A Pole

## Preparation

Find the location for installing the router and ensure a fair mobile signal reception. Refer to the [signal guidance](/ezr35-lte/manual/installation/antennas-and-signals.md#mobile-signal-quality) to find a suitable spot. Prepare the tools below, and then start the installation.

1 x Ø35–50mm diameter pole\
1 x Pliers or M10 spanner

<div align="left"><figure><img src="/files/JrjCp2dNJEHFsoDiVi3Y" alt="" width="375"><figcaption><p>Prepar Pole And Tools</p></figcaption></figure></div>

## i. Install Bracket

The M6 cross-head screws are fixed on the backside of the router. Use the cross end of the T-shape wrench to take off the screw, and install the L-shape bracket on the router's backside.

#### Antenna Direction

To achieve the best RF performance, the router antennas should be oriented vertically.&#x20;

When installed on a vertical pole, the router should be parallel to the pole. The L-shape bracket is squarely aligned with the router and the pole, as shown below.

When the pole is horizontal, change the M6 screw holes on the bracket to turn the router's direction.

<figure><img src="/files/q2X96QiUe9Muoaw2J4V1" alt=""><figcaption><p>Outdoor Router On L-Bracket with Bolts and Holders</p></figcaption></figure>

## ii. Clamp On Pole

The router uses U-bolts and Holders to clamp the bracket on the pole.

1. Take off the washers, spring washers, and hex nuts from the U-bolts.&#x20;
2. Clasp the pole with the U-bolts and holders.
3. Attach the L-shape bracket to the U-bolts.
4. Put washers, spring washers, and hex nuts on U-bolts.
5. Use pliers or an M10 spanner to turn the hex nuts and tighten them.

<figure><img src="/files/gCoeh2zCcXiZs5rlSAYU" alt=""><figcaption><p>Vertical Pole Installation</p></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://outdoor.router.works/ezr35-lte/manual/installation/mount-on-a-pole.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.