Ctrlk
HomeShop
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Wi-Fi Hotspots

A summary and configure options for wireless settings. It allows the management of Wi-Fi SSIDs, encryption, channels, and more.

Wireless Overview

After accessing the router admin panel, go to "Network > Wireless" to check the Wi-Fi status.

(wifi0) Generic Atheros 802.11bgn is the Wi-Fi V4 (2.4GHz) network

  • SSID Outdoor-WiFi-xxxx-V4 | Mode: Master – the primary 2.4G Wi-Fi hotspot

  • SSID xxxx | Mode: Client – the Wi-Fi relay connection appears after setting up a Wi-Fi relay.

(wifi1) Generic Atheros 802.11aac is the Wi-Fi V5 (5.8GHz) WiFi network

  • SSID Outdoor-WiFi-xxxx-V5 | Mode: Master – the primary 5.8G Wi-Fi hotspot

  • SSID xxxx | Mode: Client – the Wi-Fi relay connection on 5.8GHz.

Master mode is the primary hotspot created by the router. Client mode is the Wi-Fi relay connection, which only appears when a Wi-Fi relay link is established.

Turn On/Off Wi-Fi

You can turn on/off both client and master SSID by clicking the "Enable/Disable" button.

EZR35 Router Mobiel Wi-Fi Hotspots Wireless Overview Page

Associated Stations

The nether associated stations list wirelessly connected terminal devices and upstream Wi-Fi relay link sources. You can check the link quality, MAC address, hostname, Wi-Fi signals, and speed rates.

Edit Wi-Fi Hotspot

On the above wireless overview page of "System > Wireless." Click the "Edit" button on the row of related SSID to enter their configuration page.

i. Basic Wi-Fi Settings

Under the "General Setup " tab, we can monitor the network status and configure the Wi-Fi operating Mode, Channel, Bandwidth, and Transmit Power. Suggest using optimized default settings.

After connecting to a Wi-Fi relay, the Wi-Fi master SSID's Mode, Channel, and Width will be locked to the same settings as the connected Wi-Fi relay network.

If other 2.4GHz Wi-Fi hotspots are nearby, do not use 40MHz on "Width," and do not turn on "Force 40MHz mode" on the advanced settings.

EZR35-5G Mobile Wi-Fi Settings On Mode Channel Width And Power

ii. Wi-Fi Country Code

In Device Configuration, click the Advanced Settings tab, check the Country Code field, and select the corresponding country code.

It is essential to ensure the Wi-Fi hotspot on your router meets the legal regulations in your country. The other configured Wi-Fi networks will use the same device settings.

iii. SSID & Password 🔸

Scroll down and find the "Interface Configuration" section to edit Wi-Fi hotspot SSID and password.

Wi-Fi SSID

Under the "General Setup" tab, we can change the name of the Wi-Fi hotspot in the "ESSID" field. Suggest use a unique, recognizable name. Avoid using personal information in SSIDs.

Mode & Network

Keep the mode and network settings no change. The mode should use "Access Point" since it is a standalone Wi-Fi hotspot. The network firewall should bind to "lan" to ensure the internet passes through on the hotspot.

Hide ESSID

You can hide the SSID by enabling the Hide ESSID checkbox. It will stop broadcasting the Wi-Fi hotspot but will not improve security significantly. When enabled, you should manually input the Wi-Fi SSID and password to connect to a new device.

EZR35-5G Router Wi-Fi ESSID and Wireless Security Settings

Wi-Fi Password

In the Wi-Fi settings page, scroll down to the interface configuration. Click the "Wireless Security" tab to modify the Wi-Fi encryption settings.

  • Encryption: Select an encryption method. The "WPA2-PSK" and "WPA/WPA2 Mixed Mode" options are recommended for home and small office networks.

  • Cipher: The "Auto" option is recommended.

  • The Key is the Wi-Fi password. Enter your password without spaces. Special characters are allowed. The minimum length is eight characters. * Do not leave the key field blank.

  • Other default settings are qualified for general usage.

EZR35 Router - How to Set Router Password & WiFi Hotspots

Wi-Fi Relay

You can connect the outdoor router to another Wi-Fi hotspot to get a backup Internet connection or extend the current Wi-Fi network. Navigate to the "Network > Wireless" page, click the "Scan" button on 2.4G or 5.8G network, and "Join" the desired Wi-Fi network.

Click the Wi-Fi relay tutorial to get step-by-step guidance.

Wi-Fi Coverage

For better outdoor Wi-Fi coverage, suggest installing the router in an open space with the fewest barriers nearby.

To cover indoor spaces, you can install the router near the windows or doors. You can also use an indoor router and link to the LAN port on the PoE injector to improve indoor network coverage.

Last updated