Login Router

Connect a phone or computer to the 4G router via Wi-Fi or Ethernet. And log in to the router at the default router IP address 192.168.30.1.

Connect to Router

i. Wi-Fi Connection

After being connected to the electrical outlet, the 4G router will automatically turn on the power. After the router successfully boots up, you can join in the Wi-Fi hotspot Outdoor-WiFi-xxxxxx. The last six characters are the Wi-Fi module's Mac address.

The default Wi-Fi hotspot has no encryption. Connect to this Wi-Fi hotspot on a computer, laptop, or smartphone.

ii. LAN Connection

You can also connect a computer to the LAN port of the PoE adapter to access the Ethernet provided by the 4G router. When connecting to a secondary router, connect to the WAN port on the secondary router. Refer to LAN Cable / Router Mode.

iii. IP Settings

DHCP

The DHCP server is enabled on the EZR33 router. DHCP dynamically assigns the IP address, gateway, domain name server, and other information to the connected devices. Below are the default DHCP settings.

Router Address (Gateway): 192.168.30.1 Subnet Mask: 255.255.255.0 (24) DHCP IP Pool: 192.168.30.100~254 DHCP Lease Time: 12 Hours

If the DHCP function is activated on your device, it will automatically obtain the intranet IP and router IP addresses. Otherwise, you need to configure the IP addresses manually.

Static IP

Configure TCP/IP on your connected devices, and ensure the IP address is within 192.168.30.100~249. The subnet mask should be 255.255.255.0. The router address should be 192.168.30.1.

On iPhone: Goes to Settings > Wi-Fi > Advanced On Android phone: Goes to Settings > WLAN > Advanced On Mac: Goes to System preferences > Network > Wi-Fi > Advanced > TCP/IP

On Windows:

Goes to Start > Control panel > Network and internet > Change adapter setting (on the left window panel) > Local area connection > Properties (right click) > TCP/IPv4 (Internet protocol version 4) > Properties > General.

Choose Obtain an IP address automatically and Obtain DNS server address automatically Click OK to exit settings.

Click OK again in the Local area connection properties to apply the new configurations.

Login Router

After connecting your smartphone or computer to the router, open a web browser and type inhttp://192.168.30.1 in the URL address bar. Use default password 🔑root or admin to log in to the 4G router admin.

Login 4G Router at 192.168.30.1

If unable to access router admin with 192.168.30.1, please clear your browser's cache or use the complete URL path below. 🔗http://192.168.30.1/cgi-bin/luci

The default URL prefix is http:// instead of https://.