Hardware
The outdoor 4G router is an industrial-grade CAT12 LTE router for use in outdoor environments and rugged deployments.
Hardware Specifications
EZEN4X3 - MOTHERBOARD
CPU: | MTK7621 MIPS1004Kec |
Frequency: | 880MHz |
Memory: | DDR3 RAM 256MB |
Flash: | SPI FLASH 16MB |
SIM card slot: | Nano-SIM Cards (12.3×8.8mm) |
WAN/LAN port: | 10/100/1000Mbps on PoE adapter |
Indicator: | System / Wi-Fi / SIM1 / SIM2 |
Temperature: | Working: -20 to +70°C Storage: -40 to +85°C |
Humidity: | 0%~100% RH |
Package: | 307x249x130mm / 2405gram |
4G WIFI ANTENNA
2 x 4G LTE Antenna: | Frequency: 700~960 / 1710~2700MHz Gain: 3~4dBi / V.S.W.R.: ≤ 2.0 |
2 x Wi-Fi antenna: | Frequency: 2400~2500 / 5150~5850MHz Gain: 4~5dBi / V.S.W.R.: ≤ 2.0 |
Measurement: | Φ22×180mm |
Connector: | N Male |
Polarization: | Vertical |
Impedance: | 50 Ω |
Max Input power: | 10 Watt |
WI-FI HOTSPOTS
Wi-Fi standards: | IEEE 802.11 a/b/p/g/n/ac IEEE 802.3 and IEEE 802.3u |
MIMO Wi-Fi: | 2T2R Wave 2.0 MU-MIMO |
Transmission rate: | 1200Mbps |
Frequency: | 2.4GHz - 2412~2484 MHz 5.8GHz - 5180~5825 MHz |
Channel: | 2.4GHz - 1~13 5.8GHz - 149, 153, 157, 161, 165 |
Bandwidth: | 20/40 MHz or Auto |
Output power: | 802.11b: 27±2dBm 802.11g: 25±2dBm 802.11n: 23±2dBm 802.11ac: 26±2dBm |
Mesh mode: | EasyMesh Standard |
Concurrent user: | 120 users |
POWER SOURCES
PoE Injector: | Input: 110~240VAC 50/60Hz Output: 52Volt 0.5Amps |
LAN Cable: | 30-feet LAN cable included. Max 320-feet. |
PoE Wiring: | DC+ 4,5 | DC- 7,8 Ethernet on all wires |
DC Socket: | Takes wide-range 9~52V DC power DC Jack - Ø5.5/2.1mm / Length 10mm |
SOFTWARE SYSTEMS
Router Firmware: | EV4034 |
Log in: | IP address: 192.168.30.1 Password: none |
Computer: | Windows / Mac / Linux / etc |
Last updated