Dashboard
The front page provides a quick overview and real-time monitoring of mobile modem status, DHCP leases, and wireless hotspot status.
Last updated
The front page provides a quick overview and real-time monitoring of mobile modem status, DHCP leases, and wireless hotspot status.
Last updated
Built on OpenWrt v19, the EZR35-5G features an intuitive web interface. Let's quickly review the menu bar and fundamental sections of the front-page dashboard.
Under the top green menu bar, you can find "Status / System / Services / Network." Each provides a comprehensive set of tools for managing your router, from basic setup to advanced networking features.
The "Refresh" button is located in the upper right corner. When activated against a green background, it automatically refreshes and shows the updated status.
The "System" section at the top left corner displays general system information, including the router's hostname, model number, serial number, hardware architecture, firmware version, kernel version, local time, system uptime, load average, and memory usage.
The "Device" section shows the status of the 5G mobile modem, SIM card, and mobile connection. Check the explanations for each field in the Mobile Modem chapter.
The following network section displays upstream internet links, which include mobile protocols, mobile IP addresses, carrier DNS addresses, and mobile connection uptime.
Includes IPv4 and IPv6 DHCP leases to local network devices.
The wireless section includes master hotspots and WiFi relays. It displays their wireless standards, working channel, bitrate, SSID, and encryption type.
The MWAN Interfaces section shows the "Network > Load Balance" status. The multiple-WAN function is turned off by default, so their interface statuses display as "Disabled."
UPnP displays devices connected on the universal plug-and-play protocol, which enables automatic device discovery and communication without manual operation.
